Alphamoto Led Flush Mount Turn Signals – GSXR 600 – 2001-2005 / GSXR 750 – 2000-2005 / GSXR 1000 – 2001-2004

$35.70

0 out of 5

The listing is for one pair of smoke lens LED flush mount turn signals with 14 bright amber LEDs.
2 wires only – not for day time running lights. Color of light is amber.
12v 0.5w
Measurement: 1.9 inch x 1.14 inch . thickness: 0.44 inch.
To fit Suzuki
SUZUKI SV650S / SV 1000S (2003-2007)
SUZUKI Bandit 1250S (2006-2008)
SUZUKI Bandit 1200S (2000-2005)
SUZUKI Bandit 600S (2000-2007)
GSXR 750 2000-2005
GSXR 600 2001-2005
GSXR 1000 2001-2004
These signals fit directly into your existing turn signal recess, the lens then sits flush with your fairing.
Note:
1.They comes with bullet connectors, not oe connectors.
Connecting turn signals: we recommend that you cut off the connector from your stock turn signal and splice wires into new turn signal assembly using appropriate splicing connector or heat shrink and solder. This method is better than altering your bike stock wiring harness.
2.If your bike use standard bulbs, you will need a load resistor to bring the flash rate down to normal.
DO NOT USE when D.O.T is required. It has emark.

Customers Who Viewed This Item Also Viewed

See All

 

 

Product Description

The listing is for one pair of smoke lens LED flush mount turn signals with 14 bright amber LEDs.
2 wires only – not for day time running lights. Color of light is amber.
12v 0.5w
Measurement: 1.9 inch x 1.14 inch . thickness: 0.44 inch.
To fit Suzuki
SUZUKI SV650S / SV 1000S (2003-2007)
SUZUKI Bandit 1250S (2006-2008)
SUZUKI Bandit 1200S (2000-2005)
SUZUKI Bandit 600S (2000-2007)
GSXR 750 2000-2005
GSXR 600 2001-2005
GSXR 1000 2001-2004
These signals fit directly into your existing turn signal recess, the lens then sits flush with your fairing.
Note:
1.They comes with bullet connectors, not oe connectors.
Connecting turn signals: we recommend that you cut off the connector from your stock turn signal and splice wires into new turn signal assembly using appropriate splicing connector or heat shrink and solder. This method is better than altering your bike stock wiring harness.
2.If your bike use standard bulbs, you will need a load resistor to bring the flash rate down to normal.
DO NOT USE when D.O.T is required. It has emark.

Additional Information

Weight 1 lbs
Delivery and Returns Content description.
Handcrafted with in Detroit by Web Design Pros